Miele DGC 7440 X, Инструкции по эксплуатации и монтажу

Страница: 129 / 172

Automatic programmes
129
The wide range of automatic
programmes enables you to achieve
excellent results with ease.
Categories
The

automatic programmes are
sorted into categories to provide a
better overview. Simply select the
appropriate programme for the type of
food you are cooking and follow the
instructions in the display.
Using automatic programmes

Select Automatic programmes

.
A list will appear in the display.
 Select the desired food category (e.g.
Cakes ).
The automatic programmes available
for the food category selected will then
appear.
 Select the desired automatic
programme.
 Follow the instructions in the display.
Tip: Use  Info to display information
such as how to place or turn the food
depending on the cooking programme.
Usage notes
– The degree of cooking and browning
are represented by a bar with seven
segments. You can set the desired
degree of cooking or browning using
the navigation area.
– The weights specified in the
automatic programmes refer to the
weight per piece. For example, you
can cook just one piece of salmon
weighing 250 g or 10 pieces of
salmon, each weighing 250 g, at the
same time.
– The steam oven compartment needs
to cool to room temperature before
starting an automatic programme.
– When you place food into the hot
oven compartment, be careful when
opening the door. Hot steam may
escape. Step back and wait until the
steam has dissipated. Avoid contact
with hot steam, and do not touch the
hot oven compartment walls. Danger
of burning and scalding.
– Please refer to the cookbook for
information on suitable baking
containers.
– For some automatic programmes, the
start time can be delayed using Start
at or Ready at . The individual cooking
stages of the automatic programme
are listed under the
Show cooking
stages menu option.
– If by the end of an automatic
programme the food is not cooked
enough for your taste, select
Continue
cooking or Continue baking .
– Automatic programmes can also be
saved as
User programmes
. To do this,
select the  sensor control after an
automatic programme has finished.