Frequently Asked Questions
71
With the help of the following guide, minor faults in the performance of the appli‐
ance, some of which may result from incorrect operation, can be put right without
contacting Miele Service. This will save time and money.
The following guide may help you to find the reason for a fault, and to correct it.
You should, however, note the following:
Unauthorized or incorrect repairs could cause personal injury or damage to
the appliance.
Repair work to electrical appliances must only be carried out by a suitably
qualified and competent person in strict accordance with current local and na‐
tional safety regulations. The manufacturer cannot be held liable for unauthor‐
ized work.
Technical problems
Problem
Possible cause and solution
The dishwasher does
not start.
The door is not properly closed.
Raise the door upwards until the catch engages.
The dishwasher is not plugged in.
Insert the plug.
The circuit breaker has tripped.
Reset the fuse (see data plate for the correct fuse
rating).
The dishwasher is not switched on.
Turn the dishwasher on with the
button.
The dishwasher stops
during a program.
The circuit breaker has tripped.
Reset the fuse (see data plate for the correct fuse
rating).
If the circuit breaker trips again, contact Miele
Service.
After the program has
started, the Optical In‐
terface is not visible.
The indicator reflector panel was not correctly fitted.
Refit the indicator reflector panel correctly (see the
installation plan).
Содержание DA 6590 W
Страница 96: ...M Nr 10 014 190 04 en US G 6590 G 6595 ...