Installation
*INSTALLATION*
43
Installation recommendations
- We recommend a minimum distance
of 700 mm and a maximum distance
of 1300 mm.
- Please be aware that if positioned too
high, extraction will be inefficient.
- To achieve optimum vapour
extraction, the cooker hood must be
centred over the hob, not to the side
or behind it.
- The hob should be no wider than the
cooker hood, and if possible, it
should be narrower.
- If the cooker hood is being installed
in a suspended ceiling, the
installation surface all around the
cooker hood must be at least
300 mm larger than the cooker hood
itself.
- The installation area must be easily
accessible. The cooker hood should
be easily accessible and easy to
dismantle in the event that service is
required. This should be taken into
consideration when planning the
position of cupboards, shelves,
ceilings or features in the vicinity of
the cooker hood.
Uneven installation surfaces
If the installation surface is uneven
making flush installation difficult, the
frame can be realigned.
Fit the cooker hood as described on
the installation sheet.
Disconnect the cooker hood from the
mains electrical supply before
replacing the lamps (see “Warning
and Safety instructions”).
Using the suction cup supplied, pull
the lamp out of its holder.
Remove all other lamps in the same
way.
Содержание DA 2808
