Cleaning and care
60
Take the holder and silicone seal
apart.
Pull the stainless steel bolt upwards
and out.
Clean the individual components of
the milk valve in the dishwasher.
Useful tip:
If there are any dry milk
residues on the front, soak the stainless
steel bolt in warm water and a little dish
detergent.
Installing the milk valve
Insert the stainless steel bolt from
above.
Insert the silicone seal into the milk
valve holder.
Insert the holder and silicone seal
until they audibly click into place.
Connect together the angular
moulded hose and longer milk
pipework. Start by attaching the
moulded hose to the top of the
central spout. The black connecting
piece should be pointing to the rear.
Then, connect the bottom end of the
moulded hose to the dispensing unit.
Insert the milk pipework into the milk
valve on the left and right-hand sides.
Push the connecting pieces into the
silicone seal as far as they will go.
Содержание CVA 7370
Страница 85: ...85 Electricity consumption in standby 0 6 W Electricity consumption in networked standby 0 9 W ...
Страница 86: ......
Страница 88: ...M Nr 11 823 010 00 en CA CVA 7370 ...