Cleaning and care
57
Reassemble the dispensing unit.
Press down firmly so that the spouts
become securely connected to the
holder.
Insert the dispensing unit into the
coffee machine and connect the milk
pipework.
Refit the stainless steel cover.
Close the appliance door.
Fit cover to main dispenser
appears in the
display.
Confirm the message with
OK
.
Cleaning the cup rim sensor
The cup rim sensor is located at the
bottom of the central spout.
Clean the cup rim sensor at least once
a week and more often if heavily soiled.
Press the two retainers together (see
arrows).
The cup rim sensor is released.
The cup rim sensor can be cleaned in
the dishwasher, or by hand using
warm water and a little dish
detergent.
To refit the cup rim sensor, press it
into the holder on the central spout
from below.
Cleaning the milk container
with lid
The milk container should be taken
apart and cleaned every day after use.
Both the lid and the glass container can
be cleaned in the dishwasher, or by
hand using warm water and a little dish
detergent.
Remove and empty the milk
container.
Содержание CVA 7370
Страница 85: ...85 Electricity consumption in standby 0 6 W Electricity consumption in networked standby 0 9 W ...
Страница 86: ......
Страница 88: ...M Nr 11 823 010 00 en CA CVA 7370 ...