Miele CS 1011 G Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 52

Miele CS 1011 G Скачать руководство пользователя страница 9

Safety with children

~

Children should be supervised to

ensure that they do not play with the
appliance.

~

Older children may use the gas

cooktop only when its operation has
been clearly explained to them and
they are able to use it safely. They must
be aware of the potential dangers
caused by incorrect operation.

~

The appliance gets hot when in use

and remains hot for quite a while after
being switched off. To safeguard
against burning, keep children well
away from the appliance at all times.

~

Do not store anything which might

arouse a child's interest in storage
areas above or next to the appliance.
Otherwise they could be tempted into
climbing onto the appliance with the
risk of burning themselves. Danger of
burning.

~

Keep all pans out of reach of

children. Turn pan handles inwards
away from the edge of the cooktop.
Danger of burning or scalding.

~

Packaging, e.g. cling film,

polystyrene and plastic wrappings,
must be kept out of the reach of babies
and young children. Danger of
suffocation. Dispose of or recycle all
packaging safely as soon as possible.

Warning and safety instructions

9

«
...
7
8
9
10
11
...
»

Содержание CS 1011 G





















































Отзывы:

Нет отзывов