Miele CS 1011 G Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 52

Miele CS 1011 G Скачать руководство пользователя страница 8

This appliance complies with all
relevant local and national safety
requirements. Inappropriate use
can, however, lead to personal injury
and damage to property.

To avoid the risk of accidents and
damage to the appliance, please
read these instructions carefully
before using it for the first time.
They contain important notes on
installation, safety, use and
maintenance.

Keep these instructions in a safe
place and ensure that new users are
familiar with the contents. Pass them
on to any future owner.

Correct application

~

This appliance is designed for

domestic use and for use in similar
environments by guests in hotel or
motel rooms, bed & breakfasts and
other typical living quarters. This does
not include common/shared facilities or
commercial facilities within hotels,
motels or bed & breakfasts.

~

This appliance must only be used to

cook food and keep it warm.
Any other usage is at the owner's risk
and could be dangerous. Miele cannot
be held liable for damage resulting
from incorrect or improper use or
operation.

~

This appliance is not intended for

use by persons (including children)
with reduced physical, sensory or
mental capabilities, or lack of
experience or knowledge, unless they
have been given supervision or
instruction concerning its use by a
person responsible for their safety.

~

The appliance is not suitable for

outdoor use.

~

This appliance must not be installed

and used in mobile installations such as
ships etc.

~

Do not modify this appliance.

Warning and safety instructions

8

«
...
6
7
8
9
10
...
»

Содержание CS 1011 G





















































Отзывы:

Нет отзывов