Program settings
97
Program blocks
Wash block sequence is predefined and is the same as in the
program chart (see “Program chart”).
-
Pre-rinse 1
to
3
Pre-washing removes coarse soiling and foam-building substances.
-
Main wash 1
and
2
Depending on the wash load, cleaning generally occurs at
temperatures between 50°C and 85°C (104 - 140°F) with the
addition of an appropriate cleaning detergents.
-
Interim rinse 1
to
4
In the interim rinse stages the process chemicals from the
previous wash blocks are rinsed away and neutralized by the
addition of neutralizing agents.
-
Final rinse 1
to
2
To avoid deposits on the wash load demineralized water (DI) should
preferably be used if available for the final rinse.
-
Drying
Adequate drying reduces the residual moisture on the load.
