Moisture Plus
64
Set the times for the bursts of steam
as required.
Select
Continue
.
The oven heating and cooling fan will
turn on. The required and the actual
temperature will appear.
You will see the temperature rising on
the display. An audible signal will sound
when the set temperature is reached for
the first time.
If you have selected
with Timer
, you
can check the time before steam is
released by selecting
Info
.
Injecting bursts of steam
Risk of injury caused by steam.
Steam can cause severe scalding.
In addition, steam condensing on the
control panel will cause the sensor
buttons and the touch display to
react more slowly.
Do not open the door while bursts of
steam are being released.
Automatic
Once the preheating phase is complete,
the burst of steam is injected
automatically.
The water will evaporate in the oven
compartment and
Burst of steam
will
appear on the display.
After the steam has been released,
Burst of steam
will disappear.
Continue cooking until the end of the
cooking duration.
Manual
You can release the bursts of steam as
soon as
Burst of steam
appears and
Start
is shown in green.
Please wait until the preheating phase
is completed to allow the steam to be
distributed evenly by the warm air in
the oven.
Tip:
Use the
Timer
function as a
reminder.
Select
Start
.
The burst of steam will be released.
Start
is deactivated.
Proceed as described to release
further bursts of steam once
Start
is
shown in green.
After the final burst of steam,
Start
is
deactivated.
Continue cooking until the end of the
cooking duration.
with Timer
The oven will release the bursts of
steam automatically at the specified
times.
Burst of steam
appears when the burst of
steam is being released.
After the final burst of steam,
Burst of
steam
will disappear.
Continue cooking until the end of the
cooking duration.
