Cleaning and care
57
Cleaning the water intake filter
A filter is incorporated in the screw
thread to protect the water intake valve.
If the filter is soiled, insufficient water
flows into the wash cabinet.
Risk of electric shock from
voltage.
The plastic housing of the water
connection contains an electrical
valve.
The housing must not be dipped in
water.
Disconnect the dishwasher from the
power supply.
To do this, turn off the dishwasher
and withdraw the power plug.
Close the faucet.
Unscrew the water intake valve.
Take the sealing washer out of the
screw thread.
Using pointed pliers, take hold of the
plastic filter bar and pull it through the
filter.
Rinse the filter under running water.
Reassemble in reverse order.
Screw the screw thread securely
back onto the faucet. Slowly open
the faucet. If water drips out, tighten
the screw thread.
Never
forget to put the filter back in
place after cleaning.
Содержание 11 848 190
