Problem solving guide
49
Problem
Possible cause and remedy
flashes/lights up
after the tumble
dryer is switched
on and a
programme
cannot be
selected.
Access via a code has been activated.
See "Programmable functions -
PIN Code".
and
light up after
a programme has been
cancelled, a signal tone
sounds.
The fluff filters and the plinth filter are clogged with
fluff.
Clean the fluff filters.
Clean the plinth filter.
Clean the airways. This is the area underneath the
plinth filter and the heat exchanger.
See "Cleaning and care".
To switch the
fault message off:
Switch the dryer off and back on.
and another number
combination flash after
a programme has been
cancelled, a signal tone
sounds.
There is no obvious cause.
Switch the dryer off and back on.
Start a programme.
If the programme terminates again with the same
error message, then there is a fault. Contact Miele.
:
lights up and the
programme has been
cancelled, a signal tone
sounds.
The laundry is unevenly distributed or has rolled up.
Disentangle the laundry and remove a few items, if
necessary.
Switch the dryer off and back on.
Start a programme.
Содержание 11 588 800
Страница 69: ......
Страница 70: ......
Страница 72: ...M Nr 11 588 800 00 en AU NZ PDR 300 HP SmartBiz ...