background image

Warning and Safety instructions

14

 

WARNING:

 Never switch the tumble dryer off before the end of

the drying programme unless all items are removed immediately and
spread out to cool down.

 

Fire hazard!

This tumble dryer must not be connected to a controllable socket
(e.g. a timer or a peak-load switch-off device). 
There is a risk of the laundry self-igniting if the drying programme is
cancelled before the cooling phase has finished.

 

To prevent the risk of fire, the following textiles must never be

dried in the tumble dryer:

- Items which have been cleaned using industrial chemicals (e.g.

professional dry-cleaning agents).

- Fabrics which contain a large proportion of rubber, foam rubber or

rubber-like materials. For example, products made from latex
foam rubber, shower caps, waterproof textiles, rubberised articles
and items of clothing and pillows with foam rubber filling.

- Fabrics which contain padding or fillings which are damaged (e.g.

pillows, jackets). The filling could fall out and cause a fire.

 

The programme finishes when the cooling phase has been

completed. Many programmes are followed by a cooling phase to
ensure that the items are not too hot to handle when you remove
them (this also reduces the risk of the laundry self-igniting).
Make sure that you do not remove the laundry until the programme
has finished.

Содержание 11 588 800









































































Отзывы: