Cleaning and care
41
Cleaning the plinth filter
Clean the plinth filter whenever the
indicator light comes on or when the
programme duration is longer than
usual.
To turn the
indicator light off:
Open and close the door while the
dryer is switched on.
Useful tip:
With normal use of the tumble dryer,
clean the plinth filter when the
indicator light comes on.
With continuous use of the tumble
dryer, clean the plinth filter once a day.
Damage caused by insufficient
cleaning or by operation with a worn,
damaged filter in the plinth.
There is insufficient flow of air and
heat exchange in the heat exchanger,
as it is clogged. This requires a visit
from Miele Professional Service.
This can be avoided by following the
advice in these operating
instructions.
Removing the plinth filter
Press the round, indented area on the
heat exchanger access panel to open
it.
The panel will spring open.
Pull the plinth filter out by the handle.
This causes the right-hand guide pin in
the tumble dryer to come out. This
guide pin ensures that the heat
exchanger access panel can only be
closed if the plinth filter is inserted the
right way round.
Содержание 11 588 800
Страница 69: ......
Страница 70: ......
Страница 72: ...M Nr 11 588 800 00 en AU NZ PDR 300 HP SmartBiz ...