manualshive.com logo in svg

Miele professional PG 8133 SCVi XXL, Руководство по эксплуатации, Страница: 60 / 96

Поделиться
Скачать
Miele professional PG 8133 SCVi XXL Скачать руководство пользователя страница 60

Problem solving guide

60

You can easily resolve many of the minor problems you may encounter during
everyday use. This will save you time and money because you do not have to call
Miele Service.

With the aid of the following guide, the cause of a problem can be found and
eliminated. However, please note:

Repairs must only be carried out by Miele Service. Unauthorized repairs

could cause personal injury or damage to the machine.

Technical problems

Problem

Possible cause and solution

The display remains
dark and the 

Start

indicator light is not
flashing after the
dishwasher has been
turned on with the

 button.

The dishwasher is not plugged in.

Insert the plug.

The fuse has tripped.

Reset the fuse (see data plate for the correct fuse
rating).

The dishwasher stops
during a program

The fuse has tripped.

Reset the fuse (see data plate for the correct fuse
rating).

If the fuse trips again, contact Miele Service.

After the program has
started, the in-operation
indicator light is not
visible.

The indicator reflector panel was not correctly fitted.

Refit the indicator reflector panel correctly (see the
installation plan).

The door locking pins
do not retract after the
door has opened
automatically.

There is a fault with the door mechanism or the door
has not been correctly balanced.

Call Miele Service.
The dishwasher can only be used again with the
AutoOpen function switched off. There is a danger
of injury in the unlikely event of a fault with the
opening mechanism.

Содержание PG 8133 SCVi XXL

































































































Отзывы:

Нет отзывов