Operation
46
Energy management
To save energy, the dishwasher will
switch off automatically 10 minutes
after the last time a button has been
pressed or after the end of a program.
Press the
button to switch the
dishwasher back on.
The dishwasher will not switch off
while a program or the FlexiTimer is
running or if there is a fault.
Program end
At the end of a program, the in-
operation indicator light will be flashing
slowly with the door shut. The buzzer
might also be sounding.
The program has finished when
End
appears in the display and the door has
opened slightly (if applicable).
The drying fan may continue to run for
a few minutes at the end of the
program.
Open the door completely to re-
engage the door closing mechanism.
The dishwasher can now be emptied.
The in-operation indicator light will go
out 10 minutes after the end of the
program if the door is closed.
If you have deactivated the
automatic door-opening function
(see “Settings menu, AutoOpen”),
but would still like to open the door
at the end of the program, make sure
that you open the door fully.
Otherwise steam from the
dishwasher could damage the edge
of the worktop because the fan is no
longer running.