Miele professional PG 8132 SCi XXL, Руководство по эксплуатации, Страница: 77 / 96

Water connection
77
The Miele Waterproof system
As long as your dishwasher has been
installed correctly, the Miele Waterproof
anti-leak system will protect you from
water damage throughout its lifetime.
Water intake

Water in the dishwasher must
not be used as drinking water.
– The machine must be connected to
the water supply in strict accordance
with current local and national water
authority regulations.
– The water used must at least comply
with national regulations for drinking
water quality.
If the water supply has a high iron
content, there is a danger of
corrosion occurring on items being
cleaned in the dishwasher, as well as
the machine itself.
If the chloride content of the water
exceeds 100 mg/l, the risk of
corrosion to items being cleaned in
the dishwasher will be further
increased.
– In certain regions (e.g. mountainous
regions), the water composition may
cause precipitates to form, requiring
the use of softened water for the
dishwasher.
– This appliance must be installed
according to AS/NZS 3500.1.
This appliance has been supplied
with a separate back flow prevention
device. This machine must be
connected to the potable water
supply via the non-return valve
(check valve) supplied with the
machine. Before making plumbing
connections, ensure the appliance is
disconnected from the mains power
supply (switch off or unplug the
power).
- Turn off the mains water tap.
- Place the seals on both sides of the
non-return valve.
- Connect the female end of the non-
return valve to the mains water tap.
- Connect the inlet hose to the non-
return valve.
- If the filter or extension hose is
installed, ensure it is connected after
the non-return valve.
Ensure that all connections are
screwed into position correctly. The
connection point is subject to mains
water pressure. Turn on the tap
slowly and check for leaks. Correct
the position of the seal and union if
necessary.