11.
Starting at the Gate Frame, install Short Plastic Ties (M) every two feet, securing the Chain-Link Fence to the Top
Rail of the Kennel. Do the same with the Middle and Bottom Rails,
installing the ties with closer spacing,
approximately every 12 inches.
22.
23.
Sunscreen Installation
Unfold the Sunscreen (L) and, using the Long Plastic Ties (N), loosely attach it to the Top Rail of the Kennel at each
corner.
DO NOT PULL THEM TIGHT!
After the corners have been attached, loosely affix a Long Plastic Tie at each grommet on the Sunscreen around the
perimeter. Starting at one corner, pull the tie a bit tighter. Work your way around to each corner, pulling the ties
tighter and tighter until they are all snug. Now work your way around the kennel, pulling the remaining ties up as
you go.
Use pliers to grip the exposed threads and snap off the
excess at the scored area of the bolt. Finish each nut
with a Plastic Cap (P).