Doc No: TBD
Page 7
The information contained herein is the confidential and proprietary property of Midtronics, Inc.
4.
Agency Certifications for MDX ZIGBEE RADIO
This product complies with FCC OET Bulletin 65 & Industry Canada’s RSS-102 radiation exposure
limits set forth for an uncontrolled environment
This device complies with Part 15 of the FCC Rules and Industry Canada license-exempt RSS
standard(s). Operation is subject to the following two conditions: (1) This device may not
cause harmful interference. and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Cet appareil est conforme à des règlements d'Industrie Canada exempts de licence standard
RSS (s). Son fonctionnement est soumis aux deux conditions suivantes: (1) Ce dispositif ne
doit pas causer d'interférences nuisibles, et (2) cet appareil doit accepter toute interférence
reçue, y compris les interférences pouvant entraîner un fonctionnement indésirable.
Pursuant to FCC 15.21 of the FCC rules, changes not expressly approved by Midtronics Inc.,
might cause harmful interference and void the FCC authorization to operate this product.
5.
Battery Sensor Installation
The end user does not install the CELLGUARD Battery Sensor containing the MDX ZIGBEE RADIO
module. CELLGUARD Battery Sensor installation shall only be performed by installers are trained and
explicitly certified by Midtronics. All installations shall be explicitly approved by Midtronics. If you are
a certified installer and require information about CELLGUARD Battery Sensor Installation, refer to
document
CGFS-W-201 Gen 2 Dual Sensor Wiring Instructions r4
in its entirety.