background image

GR8-1250 WalMaRT

Midtronics Inc.     7000 Monroe Street     Willowbrook, IL 60527

www.midtronics.com

36

Chapter 10: Troubleshooting

MESSAGE

Option

EXPLANATION

DATA CARD ERROR DATA 

CARD NOT FORMATED. NO 

DATA WILL BE WRITTEN 

TO CARD UNTILCARD IS 

FORMATTED.

If the data card is not 

formatted. Attention 

light flashes at 0.5 

second intervals

Format the data card by selecting SETUP/FORMAT from the Main 

Menu.

CHARGER ERROR

IS CHARGER TURNED ON? 

ARE CABLES CONNECTED?

This occurs if the  

bridge cannot talk  

to the charger.

Make sure the charger is turned and the cables are connected.  Also 

make sure the Multitasker module is receiving power and is properly 

connected between the Control Module and the charger.

WIRELESS ERROR

IS CHARGER TURNED ON? 

ARE YOU WITHIN RANGE?

If wireless module 

is connected and 

message fails 4 times 

this error appears.

This happens from Main Menu into charge feature or when results are 

uploaded.

UNSTABLE BATTERY 

DETECTED

A battery that is weak, 

or that has just been 

charged, may retain 

enough electrical 

activity to be detected 

by the GR8 and will 

adversely affect the  

test results.

A fully charged battery should stabilize quickly, after which the GR8 

will automatically retest. Weak batteries should be charged and 

retested. If the battery is fully charged, check the clamp connections.

Содержание GR8-1250







































Отзывы: