Midtronics CTS-655P, Инструкция по эксплуатации

Страница: 20 / 32

•
20
•
Battery Test Results
After the test the tester will display the battery decisions with the complete results in a series of screens.
Use the UP/DOWN ARROW keys to scroll through each result. To print the results press the PRINT soft key.
To return to the MAIN MENU, press the
END soft key.
Battery decisions and recommendations
Decision Recommended Action and Information
GOOD BATTERY Return the battery to service
GOOD-RECHARGE Fully charge the battery and return it to service.
CHARGE & RETEST Fully charge the battery and retest. Failure to fully charge the battery
before retesting may cause inaccurate results. If CHARGE & RETEST appears
again after you fully charge the battery, replace the battery.
REPLACE BATTERY Replace the battery and retest. A REPLACE BATTERY result may also mean
a poor connection between the battery cables and the battery. After
disconnecting the battery cables, retest the battery using the OUT OF
GENERATOR test before replacing it.
BAD CELL-REPLACE Replace the battery and retest.
FROZEN BATTERY Defrost the battery and retest.
24 VOLT SYSTEM 24-volt system detected. Connect to 12V battery instead of the system.
LOW VOLT REPLACE Battery voltage is too low.
SYSTEM NOISE If the result system noise keeps occurring, disconnect the batteries and
test each battery individually. System noise possibly means the generator
is interfering with the batteries. Therefore, an accurate test is impossible.
Chapter 4: Battery Test
Battery decision
Measured voltage
Measured capacity
rating units
Temperature indication