Midtronics ChargeXpress PRO 15, Инструкция по эксплуатации

Страница: 11 / 16

11
Multi function ON/OFF buttons
Charger is OFF
Press Multi function ON/OFF button for more then 2 seconds. This switches on the charger. When the
charger is switched on, a corresponding LED blinks, indicating the user to select a battery technology.
Press the button consequently to scroll through the list with battery technologies. When the button is no
longer pressed, the charger automatically accepts the selection.
Charger is now ready to charge a battery.
Charger is ON
Press Multi function ON/OFF button short. This stops the charge cycle (if active). When Multi function
ON/OFF button is pressed for more then 2 seconds the charger switches completely off.
Charger ON Charger OFF
Button pressed short Stop charge cycle Button pressed long Switch on charger
Button pressed long Switch off charger
Status LED’s
Located at the bottom of the charger are two multi coloured LEDS. Each charger channel has one LED
assigned. When the charger is switched on a self-test is performed. If something is not according to
specification the multi coloured LED will turn RED.
Possible colours:
Green:
o Indicates charger is OK
o Continuous; fully charged battery
Red:
o Solid Red LED. Charger internals are not OK. See trouble-shooting section.
o Blinking RED LED Blink rate indicates a fault. Count the blink rate and check trouble-
shooting section for more details.
Orange:
o Solid lit LED indicates that battery is being charged.
Function LED
Each charger channel has 4 LEDS to indicate the selected function. A blinking LED indicates a fault, see
therefore the code table.