•
27
•
Selecting a manual or automatic test-start mode (
MODE)
The MODE utility has two test-start modes. AUTO START starts a test automatically when you
connect to the next jar from the jar results screen. The setting allows you to keep your hands free to
use probes.
MANUAL START, which is the default, prompts you to press
ENTER
to begin a test after you connect
to the jar.
1. Press the
ARROW
keys
to highlight the MODE icon in the UTILITIES SETUP menu, and
press
ENTER
.
2. Press the
ARROW
keys
(or use the numeric keys) to check the box next to MANUAL START
or AUTO START.
3. Press
ENTER
to select.
4. Press the
BACK
key to return to the UTILITIES SETUP menu.
Setting the date and time
(CLOCK)
The clock utility includes settings for the analyzer’s 24-hour internal clock and for the date and time,
which are printed on test reports. Although the date and time are set at the factory, you may need to
make changes based on your time zone.
1. Press and hold the
POWER
button until the analyzer turns on.
2. Press the
ARROW
keys
to highlight the UTILITIES SETUP icon, and press
ENTER
.
NOTE:
If you select an option you do not want, press
ENTER
to return to the Main Menu.
3. Use the
ARROW
keys to highlight the CLOCK icon, and press
ENTER
.
4. To highlight the characters you want to change, press
ENTER
. To move backward, press
BACK
. To make changes, press the
ARROW
keys
to select the number of the month, day,
year, hour, and minutes.
5. To have the analyzer accept your changes, press
ENTER
to move past the minutes setting.
Adjusting the display contrast
(CONTRAST LEVEL)
1. Press the
ARROW
keys
to highlight the UTILITIES SETUP icon, and press
ENTER
.
2. Press the
ARROW
keys
to highlight the DISPLAY icon, and press
ENTER
.
3. Press the
ARROW
keys
to highlight CONTRAST LEVEL, and press
ENTER
.
4. Press the
ARROW
keys
(or use the numeric keys) to adjust the contrast from
0
(lightest) to
10
(darkest).
5. Press
ENTER
to select.
Chapter 4: Utilities
Celltron ULTRA
Содержание Celltron ULTRA
Страница 3: ...This page intentionally left blank ...