![MiDRONE VISION 400 Скачать руководство пользователя страница 23](http://html1.mh-extra.com/html/midrone/vision-400/vision-400_user-manual_1792833023.webp)
FLIGHT PREPARATION
First synchronize the drone with the remote control as explained
earlier in this manual.
Then connect the smartphone to the drone’s WiFi ad start the
Midrone VISION 400 App on the smartphone. Disable the display
of joysticks on the control interface if needed.
You can now control the drone with the remote control and enjoy the video transmission on the
screen of your smartphone.
Problem 1: The remote control does not work at all
Cause 1: The batteries are used
Solution: Remplace the batteries
Cause 2: The batteries are not well installed
Solution: Check polarity indications and insert the batteries in the
right direction
Cause 3: The ON/OFF switch is on OFF
Soltuion: Power ON the remote control
Problem 2: The controls do not work properly
Cause 1: The drone battery is not correctly installed
Solution: Verify the connection of the battery
Cause 2: The remote control and drone are not synchronized
Solution: Start again the synchronization procedure explained in this
manual
Cause 3: Bad weather conditions
Solution: Do not fly the drone in windy conditions or if it rains
Problem 3: The drone does not take off
Cause 1: The propellers are not rotating fast enough
Solution: Push the left joystick upward
Cause 2: The drone battery is discharged
Solution: Recharge the battery
Problem 4: Brutal landing
Cause 1: The left joystick is pulled down to quickly
Solution: Pull the left Joystick slowly for a soft landing
Problem 5: Loss of control
Cause 1: Exceeding the maximum range of the remote control
Solution: The maximum range is approximately 50 m with remote and
30m in WiFi
Cause 2: Bad weather conditions
Solution: Do not fly the drone in windy conditions or if it rains.
TROUBLESHOOTING
CONTROL THE DRONE WITH THE REMOTE CONTROL
You can mount the smartphone on the remote and use the
smartphone screen for video display only.
Pull gently the mobile phone mount located under the remote
control and install your smartphone on it.
Make sure that your phone is securely fixed and won’t drop
when using the remote control.