INSTRUCTIONS FOR USE IN WIFI MODE
You can either control the drone by Midrone VISION 400 application on the smartphone, or mount
the smartphone on the remote control and use the smartphone screen only for video transmission.
This second option will be explained later in this manual.
WIFI CONNECTION BETWEEN THE DRONE AND SMARTPHONE
Download and install the application
The app Midrone
VISION 400
is needed to control the drone through the smartphone. It is available
free for download on Google Play for Android phones and on the App Store for iPhones. Just make
a search on the words
VISION 400
to find it.
WiFi connection
1. Insert the battery into the drone and press the ON/OFF button located on top of the drone,
the LED lights will flash to indicate that the drone is waiting for a connection.
2. Go to the WiFi settings of the smartphone and start the search for new devices.
3. Select VISION400xxx from the list and wait until the connection is successfully established.
4. Place the drone on a flat surface and start Midrone VISION 400 application on the smartphone.
Important informations
It is recommended to set the smartphone in airplane mode during control of the drone to avoid
receiving a call during the flight or any other disturbance which could alter the signal and cause
loss of control of the drone.
Other WiFi networks nearby can disturb the video signal.
Do not use the drone near high-voltage cables or other magnetic fields to avoid the alteration
of the transmission signal and loss of control of the drone.
When the drone is turned off and on, verify that the wireless connection is restored correctly.
CONTROL THE DRONE WITH THE SMARTPHONE
It is possible to control the drone without the remote control directly through the smartphone
screen. Place the drone on a flat surface and make sure the WiFi connection is established.
Start MiDrone VISION 400 APP on the smartphone.
Home Screen:
1. Press this button to show the instructions
of the APP.
2. Press this button to enter the parameters
menu of the APP.
3. Press this button to show the control
interface of the drone
1
2
3
