SPEED SELECTION
High/Med/Low speed mode is controlling the speed of flying forward/backward/
leftward/rightward. The default setting is slow mode. press the «speed» button,
the remote will emit two «beep» sound, the medium speed mode is selected.
Press again this button, the remote control will emit three «beep», the high speed
is now selected. Press again this button, the remote control will emit one «beep»
sound and the drone is now back to slow speed mode.
PHOTO AND VIDEO
The photos and videos are taken directly from the APP Midrone VISION 400
when the drone is connected by WiFi to the smartphone. The photos and
videos will be saved directly in the memory of the smartphone. Press the
Photo button in the APP once to take a picture. Press the Video button in
the APP once to start recording video. Press this button again to stop
recording.
If case of any emergency, an urgent shutdown is possible by
pressing deeply (more than 2 seconds) the «Auto landing» button.
(see image on the left) Do not use this function when the drone
is flying normally on a high level, or the aircraft would drop down
directly and get damaged.
URGENT SHUTDOWN
GYROSCOPE RESET / CALIBRATION
Please perform this calibration if the drone is flying unstably. This
function is making a reset the drone's gyro and of the fine
adjustments (TRIM). Before calibration, it is required to place the
drone on a flat surface. (If the landing gear is out of shape, the
reset function will be affected). Push both joysticks as shown on
the left picture, after 2 second the drone’s lights will blink fast sevral
times, the calibration is now completed.
ONE KEY RETURN
When you apply a long press to this button, the drone will fly back
to the controller's position, and this function will stop when you use
the right joystick to control the direction of the drone.
Note that the drone will not proceed to auto landing when you
activate this function. When the drone is close to teh remote
control’s position, you need to take the control of it manually.
NOTE: You can also trigger photos and videos using the buttons on the remote control when the
drone is connected to the smartphone. Press this button to trigger a photo. Long press this button
to start video recording and press it again to stop recording.
This function will not work if the drone is not connected by wifi to the smartphone.
