MidNite Solar Classic 150, Руководство пользователя, Страница: 4 / 12

52
4. Start manual equalization
1. Repeat presses of the “Main Menu” until “Charge” is highlighted
2. Press “Enter”
3. Scroll down an d highlight “EQ”
4. Press “Enter”
5. “EQ Stopped” will be highlighted
6. Scroll up to select “EQ Started”
7. Equalization process starts when “EQ Started” is highlighted
Figure A.6 : Equalization Start Interface
8. Press “Status” to return to home screen
9. On the home screen, the bottom right corner should say EQ
10. To stop a manual equalization process, reverse the steps above and make
sure “EQ Stopped” is highlighted
11. Equalization will stop when the programmed time has come to an end
5. Reconnect loads
1. Switch back on all the disconnected loads done in Step 3: Disconnect DC
and AC loads