MidNite Solar Classic 150, Руководство пользователя, Страница: 11 / 12

59
6. Load icon, there will be lighting effects in the bulb when there is an output to the
load
7. Charge LED (refer to the table below)
8. Output LED (refer to the table below)
9. Button interface
•
Enter: Press this button to enter setup interface or switch between programs
•
Up arrow: Use this to increase parameter values by increments of 0.1
•
Down arrow: Use this to decrease parameter values by increments of 0.1
•
Esc: Press this button to exit the setup interface and save the modified
parameters
Table A.4 : LED Reference
Maintenance
1. Clean the exterior of the unit with a damp cloth periodically to prevent the
accumulation of dust and dirt
2. Ensure that the terminal screws for the wires are not loose
3. Ensure that the voltage of the battery is around 12 volts
4. Ensure that the float voltage is around 13.8 volts
Figure A.11 : Float Voltage Reference
5. Ensure that the under voltage is around 10.8 volts