®
Model XT511 Series
Page 11
www.midlandradio.com
XT511 QUICK REFERENCE CHART
CHANNEL SELECTION (GMRS/FRS BAND)
Turn the
TUNING
knob clockwise or counter-clockwise to select one of the
22 GMRS/FRS channels.
MONITOR
Pressing the
MONITOR
button will let you check activity on your current
channel before transmitting. This could also be used to adjust the volume
level of the radio when it is not receiving a signal.
Press the
MONITOR
button again to get out of
MONITOR
mode.
SCAN
Your XT511 Series can scan all 22 channels for any activity. To enter,
quickly press the
SCAN
button. Repeat the same procedure to exit. Your
radio will rapidly scan each of the 22 channels and stop on any active
channel. Your radio will stay on the active channel as long as the signal is
present and will resume scanning 5 seconds after the signal is no longer
present.
When you press the
PTT
button to transmit on an active channel, the
scanning function will stop and remain on the active channel.
To resume scanning, quickly press the button.
CALL ALERT
Your XT511 Series can transmit a call alert for a fixed length of time. To
send a call alert, press the
CALL/LOCK
button. The
TX
icon will appear
while transmitting a call alert and a tone can be heard on the speaker for
confirmation.
The XT511 has 5 call alert selections.
MENU
Channel
VOX
1~22
Privacy
Roger Beep
On/Off
Power
H/L
Call Alert
oF/1~5
WX Channel
1~10
Silent Operation
On/Off
oF/1/2/3
CTCSS
DCS
oF~38
oF~83
Dual Watch
1~22
WX Alert
On/Off
Privacy
CTCSS
DCS
oF~38
oF~83
Only when Dual Watch is ON
Hour Setting
12hr AM/PM
Minute Setting
0~60
Alarm Setting
0~60
Minute Setting
0~60
Clock/Alarm Clock Function
