Midland CT3000 instruction guide
| 19
Transmitting a repeater access tone RPT TONE
1. Press
PTT
and
DOWN
at the same time to transmit a repeater access
tone. The tone set by default is 1750 Hz.
2. If you want to change the tone frequency follow these steps:
3. Press
FUNC
on the front panel to enter the radio menu;
4. Select option no. 1
FUNC MENU
;
5. Select
RPTONE
;
6. Now you can choose amongst these options:
1750 Hz - 2100 Hz - 1000 Hz - 1450 Hz
7. Push the
knob
to confirm your selection;
8. Press
P3
twice to exit the menu and return to standby condition.
Activating the frequency inversion
The frequency inversion can be activated only if a frequency offset (positive or
negative) is enabled.
1. Keep pressed
FUNC
to enter the radio menu;
2. Select option n. 2
CHAN MENU
;
3. Select option n. 8
REV
;
4. Now select
ON
with the main knob.
“Talk around” function
This function can be activated only if a frequency offset (positive or negative)
is enabled.
1. To activate the “talk around” keep pressed
FUNC
and then select option
no.9
TALK
.
2. The icon
A
will be shown on the display.
3. Now you can communicate with the other users without using a repeater.
When the Talk Around function is activated, the frequency offset will be
disabled and the radio will transmit on the rx frequency.
Содержание CT3000
Страница 33: ...Midland CT3000 instruction guide ...
