2
Detailed view of the BT Rider FM
Main unit
Buttons
The buttons on the communication units lets you enable Bluetooth
connection and telephone functions They can be activated in two
different modes:
• Short pressure: push the button less than one second
• Longer pressure: push the button for more than 3 seconds
Fixing plate with microphone and speaker
Charging batteries
Make sure that both units are fully charged prior to initial use. Allow at
least 4-5 hours for a full charge before using for the fi rst time. Normally
3-4 hours will suffi ce for complete charge.
Charge the unit by inserting the wall-charger into the charging socket
(lift the rubber cover to insert the plug).
• The red LED on the BT Rider FM will turn on when charging begins.
Allow the headset to charge until the red LED turns off.
• When the charge is complete, release the headset from the
charger.
Microphone
back-plate of the clamp (press on
arc to release the headset unit)
Sliding-plate of the clamp
Earphones
center CTRL button
side Function key
for call reject, call
termination, redial or
radio button
Charging socket
Volume -
