Midland BTX2 PRO S, Инструкция по эксплуатации

Страница: 31 / 92

UK
www.midlandeurope.com
29
Ending a call
There are several ways to end a call:
› Wait for the called person to end the call.
› Press the “Forward” button (you will hear an audio confirmation tone).
› Press “End” button on the mobile phone.
Speed dial
Only for the phone paired on “Vol+” is possible to store one phone number in
the unit memory and use it when needed. You must first save the number using
the “BT UPDATER” Pc software or the smartphone “BT SET-APP” applica-
tion. Then when you are in phone mode, just press 7 sec. the “Forward” button.
Using the MP3 player feature of the mobile phone
The mobile phone, when paired on “” or “Volume -” can be used
as stereo MP3 players. The Midland BTX2 PRO S device fully supports the
A2DP and AVRCP protocols that enable you to listen to stereo music and re-
motely control your mobile phone’s MP3 player. You can even use the buttons
on the Midland BTX2 PRO S unit to control the following play options: Play,
Pause, Forward and Backward the songs.
It is possible to control only one phone at the time. You can choose which
phone to control, pressing 3 sec. the “Vol+” button:
You will hear the voice “Control on volume up” . Now you can control the
phone paired on “Vol+” button. If you want to switch the control to the other
phone just press again for 3 sec. the “Vol+” button and you will hear the voice
“Control on volume down”.
Available controls:
› To play/pause music: click on the “Middle” button.
› To skip forward to the next song: press the “Forward” button.
› To skip backwards to the previous song: press the “Back” button.
Priority: the music listening mode has the lowest priority. Therefore, it will always
be disabled when another audio communication comes in.
To change the priority behaviour you can use the ”BT UPDATER” Pc Software
or the smartphone “BT SET-APP” application
Attention: It is possible to have all the controls (Play/Pause, FWD, BWD) of the
A2DP music only in “Phone mode”.
If you are listening to A2DP music and you move from “Phone” mode to “FM Ra-
dio” or “Intercom” mode, you can still listening to A2DP music but you don’t have
all the controls buttons available. Only Play/Pause is available with double click on
the “Middle” button.
Music Share
Music Share is possible only from the phone paired on the “Vol+” button. To
start sharing your A2DP music with the passenger already paired on the mid-
dle button (maximum distance 10mt), you must press the “Backward” button
long (3 sec.) while the music is playing.
The passenger can only stop the music share pressing short the middle button
(but cannot control the music). The driver can stop the music sharing just
pressing again the “Backward” button for 3 seconds.
With music share active you can not keep open the Intercom communication.
Attention: to enable the Music Share, make sure you sent a play command from
the Intercom device.
Attention: while in Music Share mode, the driver can open the intercom to the
passenger with a double-click on the Central button.
GPS Navigator
The GPS Navigator can be paired using the “Vol +” or the “Vol -” button.
› Volume + button (support for stereo A2DP audio and HFP mono).
All devices paired to “Vol +” button has higher priority and will interrupt all
the other communication (like Intercom, and FM Radio).
Play/Pause Forward Backward