
EN
www.midlandeurope.com
11
ATTENTION: AVOID TO CREATE A LOOP BETWEEN TWO UNITS.
If two units are already part of a mesh group, do not pair the same two units
with bluetooth intercom because if you open both mesh connection and blue-
tooth connection with “bridge on”, you will experience severe noise issues.
Bluetooth to
Mesh bridge
PASSENGER
Midland intercom
(not BTMESH)
BTMESH
Universal Intercom with different brand unit
Thanks to the “Talk2 All - Universal Intercom” feature it is now possible to pair
your Midland BTMESH to a different brand intercom available on the market.
You can pair a not Midland Intercom devices on the Backward button.
› On the Midland BTMESH enter the setup mode: (with the unit OFF press
and hold down the Middle button about 7 sec. until the Red light is on per-
manently).
› Keep pressed the “Forward” button for 7 seconds: the Red and Blu LED
lights will start flashing fast, then (while you still keep the button pressed)
the Red and Blue LED lights will change to slow flashing. Now you can re-
lease the button.
Talk2All-Universal Intercom
Not Midland Intercom
On the other intercom (not Midland brand) follow the procedure to pair to a
phone, because the BTMESH is paired as a Phone.
If successfully paired the red/blue lights will stop flashing and the blue light
will slowly flash instead.
Attention: remember to switch OFF all the other Bluetooth devices during the
pairing procedure, only the two devices involved in the pairing must be turned on.
To open the “Universal Intercom” communication on the Midland BTME-
SH while you are in “Mesh Mode”, press long (3 sec) the Forward button.
On the other intercom just press the phone redial or voice dial button.
Maybe it will be necessary to press the redial button two times, depending on
the model of the not Midland intercom.
Attention: In order to use the “Universal Intercom” feature the pairing on the
other unit must be done as a phone. The other intercom (not Midland brand) will
be able to use a phone only if two phones are supported.
You can pair also a Midland unit as Universal Intercom, that means the pairing
must be done as a phone (one unit use the Universal Intercom procedure and the
other unit use the pairing to “Phone” procedure).
Pairing the Midland BTMESH to phone and GPS navigator
The Midland BTMESH unit can be paired to other Bluetooth devices, like
Phone, GPS Navigator. The pairing procedure must be done using the “Volu-
me +” or the “Volume -” buttons.
MONO
MONO e STEREO
›
Phone (HFP Mono)
›
GPS mono
›
Phone (HFP/A2DP Stereo)
›
GPS (HFP/A2DP Stereo)
›
Motorbike TFT system