7
ADJUSTING THE VOLUME
Rotate the ON/OFF Volume control (6) clockwise to increase the volume. Rotate the
ON/OFF Volume control counter clockwise to decrease the volume.
ADJUSTING THE SQUELCH
Squelch is preset, no adjustment is available.
USING THE CALL FUNCTION
Press and release the
“CALL”
button (4) on the side of the radio.
This will cause the radio to transmit a tone to alert the other people in your
group to listen for a message.
USING THE MONITOR FUNCTION
1.
Press and release the
“MON”
button (2) on the side of the radio to open the
squelch.
This allows you to over ride the squelch and the
“CTCSS”
or
“DCS”
tones.
This is useful to monitor the channel before you transmit to ensure there is not
someone using the channel when you have
“CTCSS”
or
“DCS”
tones
programmed. This is also useful if you suspect someone in your group does not
have the proper
“CTCSS”
or
“DCS”
tones programmed.
2.
Press and release the
“MON”
button or wait 10 seconds to restore the squelch to
normal.
TURNING ON OR OFF THE BUTTON PRESS BEEP
1.
With the radio turned off, press and hold the
“ENTER”
button (8) and turn the
radio on. The radio will display all segments available on the display and sound
the power up tone. Release the
“ENTER”
button when the radio powers up. The
display will show
“FF”
or
”on”
depending on the previous setting, and below in
smaller letters
“BEEP”
2.
Press and release the
“UP”
or
“DOWN”
button to change the setting.
3.
The setting
“on”
is Beep on. The setting
“FF”
is Beep off.
4.
Press and release the
“ENTER”
button to return to operating mode.
TURNING ON THE DISPLAY BACKLIGHT
Press and release the
“ENTER”
button (8). A beep will be heard (if enabled). The
backlight will stay on for about 5 seconds then turn off.
TURNING THE ROGER BEEP ON OR OFF
Roger beep is a sound the radio transmits when you release the
“PTT”
button (3).
1.
With the radio turned off, press and hold the “
ENTER
” button and turn the radio
on. The radio will display all segments available on the display and sound the
power up tone. Release the
“ENTER”
button when the radio powers up. The
Содержание 75-517
Страница 1: ......
