Midland 75-517, Руководство пользователя

Страница: 13 / 20

13
SETTING BABY SITTER MODE
1. Choose a channel to be used, set BOTH radios to that channel.
2. With the radio off, press and hold the “ENTER” button and turn the radio on.
3. Release the “ENTER” button when the radio powers up.
4. Press and release the “ F ” button repeatedly until “bb” (usually 4 times) is on the
display.
5. Press and release the “UP” or “DOWN” button repeatedly to select the
sensitivity level.
The two numbers to the right of the “bb” is the sensitivity. This can be set
from 1 to 6. A sensitivity level of 1 is the most sensitive.
6. Press and release the “ENTER” button to activate baby sitter mode.
The radio will enter monitor mode after 1 minute waiting to hear sound. If the
remote radio hears a sound, the radio will send the call signal for three
seconds. After the call is complete the remote radio will transmit for 10
seconds. This allows you to hear the sound. After the 10 seconds of transmit is
complete, the remote radio will go to receive for 10 seconds allowing you to
transmit to the remote radio. This cycle continues 3 times then the remote radio
goes back to monitor mode.
To ensure reliable comunications be certain fresh batteries are used.
,
WARNING This monitoring is NOT intended in any way as a life saving device.
To exit the baby sitter mode
Switch the radio off then on.