Midland 75-517, Руководство пользователя

Страница: 12 / 20

12
OPERATING THE HANDS FREE VOX (VOICE OPERATED TRANSMIT)
Slide the switch on the side of the radio to “ VOX ”. Now you only have to talk into the
microphone of an optional headset pluged into jack (5) to make the unit transmit. (PTT
switch is inactive) The ”
VOX ” has two adjustments available. The first setting is the
sensitivity level. This is the level of voice needed to activate the transmitter. The
second setting is the delay. This is the time that the transmitter stays activated after you
stop talking.
Both of these settings have a value from 1 to 6. A setting of 1 in the level is the most
sensitive. A setting of 1 in the delay is the least amount of delay. These settings are set
to 3 from the factory.
Setting “VOX” Sensitivity Level:
The sensitivity is adjustable by 6 levels. Level 1 is the most sensitive.
To set the sensitivity level
1.
With the radio turned off, press and hold the “ ENTER ” button and turn the radio
on. The radio will display all segments available on the display and sound the
power up tone. Release the
“ENTER” button after the radio powers up. The
display will show “FF” or ”on” depending on the previous setting, and below in
smaller letters “BEEP”
2. Press the “ F ” button repeatedly (usually twice) until you see “ LE” on the display.
The number next to “ LE ” is the sensitivity level setting.
3. Press the “ UP ” or “ DOWN ” button repeatedly to change the “ VOX ” sensitivity.
4. Proceed to step 2 below if setting the delay is desired.
5. Press and release the “ENTER” button to return to the operation mode.
Setting “VOX” Delay.
The Delay is adjustable by 6 levels. Level 1 is the least amount of delay.
1.
Refer to step one above.
2. Press and release the “ F ” button repeatedly until “ dL ” is on the display.
The numbers next to the “ dL ” is the delay setting.
3. Press the “UP” or “DOWN” button to change the DELAY setting.
4. Press and release the “ENTER” button to return to operation mode.
Using accessories While in “VOX” mode.
Accessories for private listening are available. Those with a “VOX/PTT” switch
built in can be used with the 75-517 in “VOX” mode.
1.
Set the accessory VOX/PTT switch to “PTT”.
2. Turn on the radio. Set the radio to “VOX”. Set the accessory VOX/PTT switch
to”VOX”.
,
If you have turned on the radio with the accessory VOX/PTT switch in “VOX”
position you may find that the radio is transmitting continuously. Switch the accessory
to PTT and back to VOX to stop the radio from transmitting.
,
Key beep tones may sound very loud when using a headset or earpiece. We
advise turning off tones when using accessories.