Miditemp MP 22-CD Скачать руководство пользователя страница 25

Страница: 25 / 131

MIDITEMP MP 22-W, MP 22-CD, MP 88-W, MP 88-CD, PMM 88-E, MT 16-X

9.10 Backup of a storage device (BAK)

With the Backup function you can copy easily the complete contents of one storage device

(including all files and directories) to another.

Enter the Drive function menu

select

BAK

«.

You will be asked:

➊

Enter the corresponding letter of the drive you want to backup.

➋

Enter the corresponding letter of the destination drive.

➌

Confirm with

, the display shows the advancement of the work.

If the work is complete the unit automatically removes to the top level display.
With

you can break the function!

If a device is not ready, or if a device is not formatted, the unit gives an adequate message
bevore moving to the display of step

➊

➋

and removes to the top level.

9.11 Switch off hard disk drive motor (OFF)

Here you can switch off the motor of the drive selected in the function

. Use this

function only if you know that there will be no disk access for a long time, since spinning up and
down will wear out the drive a little bit more than constant operation.

! ATTENTION: The Wave player will neither play from a stopped drive, nor start the drive!

Enter the Drive function menu

select

OFF

«.

The drive motor spins down and starts automatically with the next required access
(this does not apply for Waves!).

<DRIVE> Select function:

MKD RMD BAK FMT OFF

Backup from ?

A: B: C: D: -- F: -- --

Backup from name: to ?

A: B: C: D: -- F: -- --

Backup from name: to name:
Ok to start backup ?

<DRIVE> Select function:

MKD RMD BAK FMT OFF

Содержание MP 22-CD




































































































































Результаты поиска

Содержание MP 22-CD

Отзывы:

Бренды по названию

Популярные бренды

Miditemp MP 22-CD, Руководство пользователя

Результаты поиска

Содержание MP 22-CD

Отзывы:

Бренды по названию

Популярные бренды