USB DRIVER SOFTWARE INSTALLATION
When you use this master keyboard with Windows 98 or Windows 2000, you
must install USB driver software into your computer with attached CD-ROM.
Put the CD-ROM in CD-ROM driver tray, then you can find there are two
directories in the CD-ROM: Win98 and Win2000. Open one according to the
Windows version you are using. Double click on the “SETUP” icon, installation
will start. You simply follow instruction to complete all steps.
SWITCH ON
There are two ways to power the unit:
1.
Use USB cable to connect USB socket of computer.
2.
Use external adapter: Plug output jack of proper AC adapter into the DC
socket in the rear panel.
3.
Then slide power switch to ON. Display will show “001” as program
number and the unit transmit initial program number to the equipment connected
to
0,',678',2
immediately. When you play on the keyboard, notes and its
velocity message will be transmitted. Note number corresponding to the most
left key is 36.
Note:
The default display is program number. After any operation in the unit, the
display will return to program number. Data transmitted is the number on the
display minus 1. For example, program number “001” on the display is
transmitted as “000”, etc
After legal operation, the data change will be transmitted immediately.
Содержание MidiStudio 2
Страница 1: ...Usermanual 0 678 2 0 678 2 0 678 2 0 678 2...
