4. After a short time the active CC number will be shown. Overwrite it with the
new CC controller number by the ten key groups (1-127) and press enter
5. Finally, press MIDI/SELECT knob key again to finish assign knob.
Now you have assigned to one Control knob the MIDI Parameter -Repeat the
same method for the other 16 real-time Controller Knobs and Faders.
2.1.7 Selecting and setting a presetbank
There are 15 presetbanks with predefined controller settings, each with 20
controllers (Midichannel, Midicontroller Nr.)
All settings are stored in an EE-Prom to be sure at power off or battery change
state.
At the end of this usermanual you can find a list with the factory settings of the
controllers.
For selecting a presetbank press MIDI/SELECT, then the OCTAVE UP or
DOWN to increase or decrease the banknumber you want to choose, then press
ENTER. Now you can use the new bank, with 20 new controller settings.
For setting a presetbank, please see part Assignment of the 20 Real-time
Controllers!
12
