8
Trunking Delay Enable:
Check this box if using a trunking system. This will cause the unit to hold off transmitting
the ANI until it has received a channel acquisition acknowledgement from the radio. This field is not used with
portable radios.
Key-Up Delay:
This sets the amount of time the unit waits after keying the radio before it transmits the ANI.
CAD Settings:
System ID:
Set this field to the same value as the System ID programmed into the CAD-800 or CAD-800U. Only
a CAD-800 with the same System ID can decode the GPS location information from the GPS speaker mic. This
field is a six character field that supports 000000-FFFFFF (0-9 & A-F) for a total of 16,777,216 possible System
IDs.
Restore System ID To Default:
Pressing this button will return the System ID to Midian’s default System ID of
4D6964.
Group ID:
This sets the group number that the unit is a part of. The Group ID is a 3 character field that supports
000-FFF (0-9 & A-F) for a total of 4096 groups.
Individual ID:
This sets the unit’s identification number. The Individual ID is a 5 character field that supports
00000-FFFFF (0-9 & A-F) for a total of 1,048,576 unit IDs per group. Between all groups and unit IDs the total
number of supported IDs by the system is 4,294,967,296.
Enable CAD Decode:
Checking this box enables Midian’s FMP signaling features such as Polling, Radio
Disable, Radio Enable, Selective Calling, Remote Monitoring and Emergency Acknowledge.
Polite Transpond:
If the unit is required to transpond in response to a command from the CAD-800, it will do so
immediately after receiving the command. Checking this box will cause the unit to check for a busy channel
indication (using VOX or COR) before transponding. If the channel is busy, the transpond will be postponed until
the channel is no longer busy.
Spy Duration:
When a Spy command (remote monitoring) is received from the CAD-800, this sets the amount of
time that the speaker mic will key-up the radio and transmit audio from the microphone.
Number of Rings:
This sets the number of times the speaker microphone will ring when it receives a selective
call before timing out.
