10
Signaling Position Settings: Leading and trailing signaling types (ANI, FMP and FMP w/GPS) can be selected
here. For example MDC-1200 can be sent on the leading edge and Midian’s FMP with GPS can be sent on the
trailing edge.
ANI:
The ANI specified in this selection is not the typical FMP ID used by Midian’s GPS speaker mics. Instead
this refers to ANI formats such as MDC-1200, FleetSync, DTMF, 5-Tone or GE-Star. One of these formats can be
selected to send a pre-ANI or post-ANI.
FMP:
This refers to Midian’s signaling protocol used in the GPS speaker microphone minus the GPS location
information.
FMP w/GPS:
This refers to Midian’s signaling protocol used in the GPS speaker microphone including the GPS
location information.
Protocol Format:
Select the desired signaling format in which the ANI and ENI will be transmitted.
Tone Duration:
This field only applies to DTMF and 5-Tone formats and sets the length of each tone.
Tone Gap Duration:
This field only applies to DTMF and sets the length of the gap between tones.
Fleet ID:
This field only applies to FleetSync and sets the Fleet ID of the unit.
Unit ID:
This sets the non-FMP ANI of the unit.
Message:
This field only applies to G-Star.
Status:
This field only applies to G-Star.
Repeat Delay:
This sets the time after sending an ANI that the unit will wait before sending another ANI.
