Midian DDU-300, Инструкция по эксплуатации

Страница: 9 / 22

M
IDIAN
E
LECTRONICS
I
NCORPORATED
P
AGE
9
DDU-300 Manual Rev. 2006.02.22
ADD USER is selected, you will be prompted to fill in
the User ID and User Name for that user.
5.4.1.1 User ID field
This numeric field contains the primary ANI number
assigned to the user’s radio. The digits can be 0-9.
Range: 4 digits
Default: blank
5.4.1.2 User Name field
This alphanumeric field contains the name of the user
associated with the user ID. A maximum of 14
characters may be used. See the Entering
Alphanumeric Data section for more information.
Range: 0-14 characters
Default: blank
5.4.2 Edit User menu
Allows you to change information about a user. When
you choose EDIT USER (or Delete User) the left and
right scroll indicators will appear on the bottom line.
This is the Select Mode. Use the <SCROLL> keys to
locate the desired user within the database. When the
name is located, press the <SEND> key to edit that
user record.
To locate a user in the database more quickly, you can
enter one or more of the first few digits/letters of the
User ID/Name prior to pressing the right <SCROLL>
button. The DDU will search the database for users
matching the first few digits/letters.
5.4.3 Delete User menu
Allows you to delete a user record from the database.
When DELETE USER is selected, you will be able to
select the user you wish to delete in the same manner
as if selecting a user to edit. Use the scroll buttons to
find the user you wish to delete. Press <SEND> to
delete the selected user. You will have to press
<SEND> a second time to confirm. Press <#> to
cancel if you change your mind.
5.5 ADMIN
MENU
5.5.1 Set Key #1 setting
Allows you to modify security key code #1. The key is
sent when one of the Prog Key(s) command is issued.
All 8 digits must be entered.
Range: 8 digits
Default: 19981998
5.5.2 Set Key #2 setting
Allows you to modify security key code #2. The key is
sent when one of the Prog Keys command is issued.
All 8 digits must be entered.
Range: 8 digits
Default: 22223456
5.5.3 Set Key #3 setting
Allows you to modify security key code #3. The key is
sent when either the Prog Keys 1-3 or Prog Keys 1-4
command is issued. All 8 digits must be entered.
Range: 8 digits
Default: 33334567
5.5.4 Set Key #4 setting
Allows you to modify security key code #4. The key is
sent when the Prog Keys 1-4 command is issued. All
8 digits must be entered.
Range: 8 digits
Default: 44445678
5.5.5 Disable Unit command
Allows you to remotely disable a unit. This is useful if
the unit is lost, stolen, or the user didn’t pay their bill.
Simply enter the 4-digit code of the unit, or select from
the database as if using the CALL command.
5.5.6 Enable Unit command
Allows you to remotely enable a unit that was
previously disabled. Simply enter the 4-digit code of
the unit, or select from the database as if using the
CALL command.
5.6 SETUP
MENU
5.6.1 SOUNDS SETUP menu
5.6.1.1 Keypad Beep option
Turning this option on causes a beep to be heard for
each key press.
OFF Keypad beeps off.
ON Keypad beeps on.
5.6.1.2 Beep On ANI option
Turning this option on will cause an alert beep to be
heard every time a new ANI is received.
OFF Do not beep when ANI comes in.
ON Beep when ANI comes in.
5.6.1.3 Emerg Siren option
This causes a siren sound to be heard when an
emergency ANI is received.
OFF Do not sound siren on emergency ANI.