Midea WWK08CW71E, Руководство пользователя

Страница: 8 / 17

7
INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS
B.Drive 1/2" (12.7mm) locking
screws through frame holes into window sash (Fig.8).
3/4" (19mm) or
Fig.8
C.To secure lower sash in place, attach right angle
sash lock with 3/4" (19mm) or 1
screw as
shown(Fig.9).
/2" (12.7mm)
Fig.9
D.Cut and insert it in the
space between the upper and lower sashes (Fig.10).
Window sash seal foam
Fig.10
FOAM SEAL
INSTALL R1 HARDWARE (only be
applicable to Energy star models )
6 6
In order to minimize air leaks and ensure optimal
insulation, it is necessary to install the included R1
hardware to the side curtain. Follow the instructions
below.
Step 1. After the unit is installed to the window,
measure the inner width of the side curtain as shown
(Fig.11).
Measure the inner width
of the side curtain
1 2 3
4 5 6 7 8 9
10 11 12 13 14 15 16
17
1
2 3 4
5 6
Fig.11
Step 2. Remark a line on the provide R1 insulation
panel according to a length 1/8 (3mm) less than the
measured width in step 1, then cut the R1 insulation
panel along the line (Fig.12).
or
Fig.12
Step 4. Repeat on the other side.
Fig.13
Step 3. Slide the R1 insulation panel into the side
curtain, the side with pattern should facing the indoor
side.(Fig.13).