NOTE:
Some models without MED fan speed feature and (or)
AUTO mode feature and (or) swing feature.
POWER:
Press the POWER keypad to turn the unit on/off.
MODE:
Press the "MODE" keypad to select the appropriate ope-
rating mode. The mode selection will alternate between
AUTO, HEAT(cooling only models without), COOL, FAN
and DRY.The indicator light beside the "MODE" option
will illuminate, identifying the mode selected.
Vent Control
The vent control is located above the control knobs. The operation method and the shape may vary in different models (see the following
figures)
.
For maximum cooling efficiency, CLOSE the vent. It will allow internal air circulation. OPEN the vent to discharge stale air.
CLOSE
OPEN
CLOSE
VENT
OPEN
NOTE: The vent control is not available for all the units. Some units do not have vent control.
6
NOTE:
Different models have different operation panels. Not all the functions describing below are available for the air conditioner
you purchased. Please check the operation panel of the unit youpurchased. The following graphics are
for explanatory purposes.
The actual shape shall prevail.
OPERATION INSTRUCTIONS
FAN:
Press this keypad to activate the appropriate fan speed setting. Each depression of the keypad will alternate through LOW, MED(on some models),
HIGH fan speed options. The indicator light beside the FAN speed option will illuminate, identifying the fan speed selected.
SWING:(on some models)
Press the "SWING" keypad to activate the automatic air swing feature. The indicator light adjacent to the "SWING" keypad will illuminate, identifying
to the selected mode is operational. The vertical louvers will oscillate back and forth (side to side) automatically sweeping air alternately for comfortable
cooling/heating. To stop the air swing feature, press the "SWING" keypad again, the indicator light adjacent to the keypad will go off.
O
C
SWING
TIMER
SWING
TEMP
FAN
MODE
AUTO
POWER
HEAT
COOL
FAN
DRY
SLEEP
HIGH
MED
LOW
Med
Heat
TEMP
HEAT
TEMPERATURE SETTINGS UP:
Press the keypad to increase the set (operating) temperature of the unit. Each time the keypad is pressed the temperature increases as follows:
1
℃
(Celsius Scale) Maximum Setting 30
℃
/
31
℃
.
TEMPERATURE SETTINGS DOWN:
Press the keypad to decrease the set (operating) temperature of the unit. Each time the keypad is pressed the temperature decreases as follows:
1
℃
(Celsius Scale) Minimum Setting 17
℃
/
16
℃.
TIMER:(on some models)
When the unit is on, press the Timer button will initiate the Auto stop program, the TIMER OFF indicator light illuminates. Press the UP or down but-
ton to select the desired time. Press the TI MER button again within 10 seconds, the Auto start program is initiated. And the TI MER ON indicator light
illuminates. Press the up or down button to select the desired Auto start time.
When the unit is off, press the Timer button to initiate the Auto start program, press it again within 10 seconds will initiate the Auto stop program.
Press or hold the UP or DOWN button to change the Auto time by 0.5 hour increments, up to 10 hours, then at 1 hour increments up to 24 hours.
The control will count down the time remaining until start.
The system will automatically revert back to display the previous temperature setting if there is no operation in a 10 seconds period.
Turning the unit ON or OFF at any time or adjusting the timer setting to 0.0 will cancel the Auto Start/Stop timer program.
TIMER:(on some models)
Press the “TIMER” keypad to activate the “auto start/auto stop” timer function.
Auto start/stop programs can be set from 0~12 hours. Each depression of the “TIMER” keypad will incrase the selected time in 1 hour increments.
•
•
•
•
•
AUTO
HEAT
DRY MODE:(on some models)
This mode is used to decrease the humidity in the room.
Under this mode, you cannot select a fan speed. The fan
motor operates at LOW speed. Keep windows and doors
closed for the best dehumidifying effect.
NOTE:
On the DRY mode, you can not adjust temperature
on some models.
COOL MODE:
The temperature setting are adjustable between 17
℃
to
30
℃
(or 16
℃
to 31
℃
). You can select your desired fan speed.
HEAT MODE:(on some models)
The temperature settings are adjustable between 17
℃
to
30
℃
(or 16
℃
to 31
℃
) in heating mode. You can select your
desired fan speed.
AUTO MODE:(on some models)
The fan motor remains on MED speed in AUTO mode. The
unit will select the appropriate operating mode from FAN,
COOL or HEAT(For reverse cycle models only) based upon the temperature difference between the actual and desired room temperature.Some models
wihtout MED speed,the fan motor operates on HIGH speed in AUTO mode.
NOTE:
On the AUTO mode, you can not adjust temperature and fan speed.
FAN
MODE
:
(
on some models
)
Press the "MODE" keypad to select the FAN mode, you can press "FAN" keypad to select your desired fan speed but you can not adjust temperature.
Содержание MWF09HB4
Страница 15: ......
