Midea MW06DRWBA1RCM, Руководство пользователя

Страница: 16 / 34

Fig.10
FOAM SEAL
14
INSTALLATION INSTRUCTIONS
Measure the inner width
of the side curtain
Fig.11
or
Fig.12
Fig.7A Fig.7B
DRIVE LOCKING SCREWS
A: For wooden windows:
Drive 1/ 2
(12.7 mm) locking screws through the frame
lock and into the sill (Fig.8A). NOTE: To prevent
window sill from splitting, drill 1/8 (3mm) pilot holes
before driving screws. Drive 1/ 2 (12.7mm) locking
screws through frame holes into window sash (Fig.8B).
B: For Vinyl-Clad windows:
Drive 1/ 2 (12.7 mm) locking screws through the frame
lock and into the window sashl (Fig.8B). NOTE: Before
driving the screws, use a drill to drill 5 holes through
the holes in the frame lock and frame extensions into
the windows sash as shown (Fig. 8B).
Fig.8A Fig.8B
C.To secure lower sash in place, attach right angle
sash lock with 3/4" (19mm) or 1
screw as
shown(Fig.9).
/2" (12.7mm)
Fig.9
D.Cut and insert it in the
space between the upper and lower sashes (Fig.10).
Window sash seal foam
INSTALL R1 HARDWARE (only be
applicable to Energy star models )
In order to minimize air leaks and ensure optimal
insulation, it is necessary to install the included R1
hardware to the side curtain. Follow the instructions
below.
Step 1. After the unit is installed to the window,
measure the inner width of the side curtain as shown
(Fig.11).
Step 2. Remark a line on the provide R1 insulation
panel according to a length 1/8 (3mm) less than the
measured width in step 1, then cut the R1 insulation
panel along the line (Fig.12).