HOW TO USE
ASSEMBLY BEFORE USE
Fig.1 shows the connection of the hose and the vacuum cleaner:
Put the hose connector in front of the vacuum cleaner .Then insert it into the inlet hole
and turn right. If you want to disassemble it, you can turn the hose connection left and
then pull it out.
Fig.2 shows the connection of the hose and the extending plastic tube:
Hold the flexural connector of the hose and put it into the bigger hole of the tube.
Fig.3 shows the adjustment of the extending plastic tube:
Put the tube into the bigger hole of the other one.
Fig.4 shows the connection of the tube and the brush tool:
Put the plastic tube into the hole of the brush and rotate it to fasten them.
Fig.5 shows how to check the winding of the power cord.
You can pull the power cord out of the machine and stop it when you see the yellow
mark. Make sure the red mark is not out. When your sweep is over, first turn off the
power, pull the plug out of the socket, and then push the winding device button until
the cord is completely in the machine.
Fig.6 shows the power button
Put the plug into the socket, push the power button to control the work of the
machine.
Fig.1 Fig.2
Fig.3 Fig.4
