Figure 9
Figure 10
3) Use in handheld state
3-1. hose mode- Install hose assembly and straight nozzle:
Align the notch of hose assembly with the button on the
front of main body.
a. When you hear a "click", it is installed in place.
Note: If you don't hear a "click", please rotate the
hose connector until you hear it, as shown in Figure 9.
b. Install straight nozzle: Align the snap on the straight nozzle with the sliding
notch on connector on steam port of hose and push in. Then rotate the straight
nozzle until the snap enters the notch, which indicates it is installed in place, as
shown in Figure 10.
3-2. adaptor mode- Install Handheld Adaptor
a.Align the notch of hose adaptor with the button on
the front of main body.
When you hear a ""click"", it is installed in place."
Note: If you don't hear a "click", please rotate the hose
connector until you hear it, as shown in Figure 11.
Attention!
Only properly in the hose mode or adaptor mode can the machine be used
with any accessory.
Figure 11
8
