Midea MPPB-14CRN7, Инструкция по эксплуатации

Страница: 38 / 283

Installation
Type 3: Wall Installation(optional)
-Cut a 125mm (4.9inch) hole into the wall for the Wall Exhaust Adaptor B.
-Secure the Wall Exhaust Adaptor B to the wall using the four Anchors
and Screws provided in the kit.
-Connect the Exhaust Hose Assembly(with Wall Exhaust Adaptor A) to the
Wall Exhaust Adaptor B.
Note: Cover the hole using the
adaptor cap when not in use.
Note: To ensure proper function, DO NOT overextend or bend
the hose. Make sure that there is no obstacle around the air
outlet of the exhaust hose (in the range of 500mm) in order to
the exhaust system works properly. All the illustrations in this
manual are for explanation purpose only. Your air conditioner
may be slightly different. The actual shape shall prevail.
max 120cm or 47 inch
min 30cm or 12 inch
Expansion anchor
position
Adaptor cap
Wall Exhaust
Adaptor B
Cut the non-adhesive foam
seal C strip to match the
window height. Insert the foam
seal between the glass and the
window frame to prevent air
and insects from getting into
the room.
If desired, install the security
bracket with 2 screws as shown.
Foam seal C
(Non-adhesive type)
2 Screws
Security
Bracket
Insert the window slider adaptor
into the hole of the window slider.
10
EN