Page 16
Ins
tallation
Ins
tructions
Type 2: Sliding window installation
1. Cut the adhesive foam seal A and B strips to the
proper lengths, and attach them to the window sash
and frame as shown.
Window slider A
Window slider B
(if required)
Foa
m
seal B
(Adhesive
type-shorter)
Foa
m
seal A
(Adhesive
type)
Foa
m
seal C
(Non-adhesive type)
2 Screws
Security
Bracket
2. Insert the window slider assembly into the window
opening.
3. Cut the non-adhesive foam seal C strip to match the
window height. Insert the foam seal between the glass
and the window frame to prevent air and insects from
getting into the room.
4. If desired, install the security bracket with 2 screws
as shown.
5. Insert the window slider adaptor into the hole of the
window slider.
NOTE
To ensure proper function, DO NOT overextend or bend the hose. Make sure that there is
no obstacle around the air outlet of the exhaust hose (in the range of 500
mm
) in order to
the exhaust syste
m
works properly. All the illustrations in this
m
anual are for explanation
purpose only. Your air conditioner
m
ay be slightly different. The actual shape shall prevail.
