Window Kit Installation
Your window kit has been designed to fit most standard
"vertical"and "horizontal" window applications. However,
it may be necessary for you to improvise/modify some
aspects of the installation procedures for certain types
of windows. Please refer to Fig. 2 & Fig. 2a for minimum
and maximum window openings.
Before Starting This Unit
1) Select a suitable location, making sure you have easy
access to an electrical outlet.
2) Install the Flexible Exhaust Hose and the Adjustable
Window Slider Kit as depicted.
NOTE: Step 2 is required only while using the AIR
CONDITIONER MODE
3) Plug the unit into a 115V/60Hz grounded electrical
outlet.
DO NOT USE AN EXTENSION CORD.
4) Make sure the Water Tank is correctly positioned inside
the cabinet otherwise the unit will not operate.
5) To turn the unit on, press the I/O key (On/ Off Switch).
Water Tank Safety Feature
This unit is equipped with a fail-safe switch mechanism
which prevents the unit from condensing water in the
event the water tank is accidentally displaced, and/or
FULL with water. If this situation occurs, the unit will
signal 8 BEEPS and the WATER FULL indicator light
will flash red continuously until the water tank is correctly
positioned and/or emptied.
NOTE: The fan motor will continue to operate under this
condition. This is normal, but no cooling or
dehumidifying will occur until the tank is emptied and/or
correctly installed (It may take several minutes before the
compressor resumes normal operation).
2.2 Window Installation
Window Slider Kit
5
Minimum: 26 / "(67.5 cm )
8
3
Maximum: 48 / "(123cm)
8
Window Slider Kit
5
Minimum: 26 / "(67.5 cm )
8
3
Maximum: 48 / "(123cm)
8
Horizontal Window
Vertical
Window
6
