Midea MOB30-09HFN8-QRE6GW, Руководство пользователя

Страница: 25 / 63

User manual Innova IMRZ
25
ENGLISH
• Before changing the filter or cleaning,
turn off the unit and disconnect its
power supply.
• When removing filter, do not touch metal
parts in the unit. The sharp metal edges
can cut you.
• Do not use water to clean the inside
of the indoor unit. This can destroy
insulation and cause electrical shock.
• Do not expose filter to direct sunlight
when drying.
This can shrink the filter.
CAUTION!
AIR FILTER REMINDERS (OPTIONAL)
Air Filter Cleaning Reminder
After 240 hours of use, the display window
on the indoor unit will flash “CL.” This is a
reminder to clean your filter. After 15 seconds,
the unit will revert to its previous display.
To reset the reminder, press the LED button
on your remote control 4 times, or press the
MANUAL CONTROL button 3 times. If you
don’t reset the reminder, the “CL” indicator will
flash again when you restart the unit.
Air Filter Replacement Reminder
After 2,880 hours of use, the display window
on the indoor unit will flash “nF.” This is
a reminder to replace your filter. After 15
seconds, the unit will revert to its previous
display.
To reset the reminder, press the LED button
on your remote control 4 times, or press the
MANUAL CONTROL button 3 times. If you
don’t reset the reminder, the “nF” in idicator
will flash again when you restart the unit.
• Any maintenance and cleaning of
outdoor unit should be performed by
an authorized dealer or licensed service
provider.
• Any unit repairs should be performed
by authorized dealer or licensed service
provider.
CAUTION!
MAINTENANCE –
LONG PERIODS OF NON-USE
If you plan not to use your air conditioner for an
extended period of time, do the following:
Clean all filters
Turn on FAN
function until unit
dries out completely
Turn off the unit and
disconnect the power
Remove batteries
from remote control
MAINTENANCE – PRE-SEASON INSPECTION
After long periods of non-use, or before periods of
frequent use, do the following:
Check for damaged
wires
Check for leaks
Make sure nothing is blocking all
air inlets and outlets
Clean all filters
Replace batteries